quadlogo.png
Have you seen our United States website? Visit USA today!
We also have websites for: Visit USA Visit USA Visit USA Visit USA Visit USA

Studyset Holybro Kakute F7 STM32F745 Flight Controller W/ OSD Barometer for RC Drone

Price: £47.63
Product prices and availability are accurate as of 2019-05-21 05:31:02 UTC and are subject to change. Any price and availability information displayed on http://www.amazon.co.uk/ at the time of purchase will apply to the purchase of this product.
Usually dispatched within 2-3 business days
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Product Description

Quadcopter-Drones.co.uk are delighted to present the brilliant Studyset Holybro Kakute F7 STM32F745 Flight Controller W/ OSD Barometer for RC Drone.

With so many on offer today, it is great to have a name you can recognise. The Studyset Holybro Kakute F7 STM32F745 Flight Controller W/ OSD Barometer for RC Drone is certainly that and will be a excellent acquisition.

For this price, the Studyset Holybro Kakute F7 STM32F745 Flight Controller W/ OSD Barometer for RC Drone is widely respected and is always a regular choice amongst lots of people. Studyset have added some excellent touches and this means great value.

Manufacturer Description

Description:

Item name: Kakute F7

Brand name: Holybro

MCU: STM32F745 32-bit processor

IMU: ICM20689 (SPI)

Barometer: BMP280

USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART) 6 hardware UARTS (UART1,2,3,4,6,7)

All UARTS support hardware inversion. SBUS, SmartPort, and other inverted protocols work on any UART without uninvert hack

Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported.

TF card for Blackbox logging

Dimensions: 35x41x7mm (includes foam-mounted gyro board in height)

Mounting Holes: Standard 30.5mm square to center of holes

Weight: 9g

Products include:

1x Kakute F7 flight controller

1x foam

1x FFC

1x JST SH 8pin 150mm cable

Note:manual measurement may be different from 1-3 cm. The colors deviation might differ due to different monitor settings, please kindly understand.

Product Features

--Supports Betaflight, Butterflight, and Cleanflight. --Betaflight OSD. Change PIDs, adjust common configuration parameters, and change video transmitter channel. --Soft-mounting built in. The IMU ("gyro") chip on this board is mounted on vibration-isolating foam. --Ready for autonomous flight: Integrated BMP280 barometer and SCL/SDA pads for use with external GPS/magnetometer units.

Write a Review

Fresh Store Builder - The Most Advanced Amazon Affiliate Software