0
quadlogo.png
0
Have you seen our United States website? Visit USA today!
We also have websites for: Visit USA Visit USA Visit USA Visit USA Visit USA

Matek PDB , Power Distribution Board ( BEC 5V&12V , with XT60 , 6 ESC Output ) for X or H Design FPV Racing RC Drone Quadcopter by LITEBEE

Price: Click Button for Price
Product prices and availability are accurate as of 2019-07-23 16:51:43 UTC and are subject to change. Any price and availability information displayed on http://www.amazon.co.uk/ at the time of purchase will apply to the purchase of this product.
Availability: Not Available Discontinued
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Product Description

Quadcopter-Drones.co.uk are inspired to present the excellent Matek PDB , Power Distribution Board ( BEC 5V&12V , with XT60 , 6 ESC Output ) for X or H Design FPV Racing RC Drone Quadcopter by LITEBEE.

With so many on offer these days, it is great to have a name you can believe in. The Matek PDB , Power Distribution Board ( BEC 5V&12V , with XT60 , 6 ESC Output ) for X or H Design FPV Racing RC Drone Quadcopter by LITEBEE is certainly that and will be a perfect buy.

For this great price, the Matek PDB , Power Distribution Board ( BEC 5V&12V , with XT60 , 6 ESC Output ) for X or H Design FPV Racing RC Drone Quadcopter by LITEBEE is highly recommended and is always a regular choice with many people. Litebee have provided some nice touches and this equals great value for money.

Manufacturer Description

DOWNLOAD MANUAL:http://www.mateksys.com/downloads/PDB-XT60_Manual_EN.pdf

General:
- Input voltage range (3S-4S LiPo operation): 9 - 18V DC
- Regulated 5V and 12V outputs
- LED power indicators ( 5V andamp; 12V outputs )
- 6 ESC outputs andamp; 1 pair VCC/GND pads

ESC outputs:
-Continuous current: 25A*4 or 15A*6
- Peak current (10 seconds/minute): 30A*4 or 20A*6

BEC 5V output:
- Designed for RC Receivers, Flight controllers, OSD, and Servos.
- DC/DC synchronous buck regulator.
- Voltage: 5.0 +/- 0.1VDC
- Continuous current: 2 Amps (Max.2.5A 10s/minute)
- Output Ripple: 40mV (VIn=16V, VOut=5V2A load)
- Short-circuit tolerant (5 seconds/minute)

BEC 12V output:
- Designed for Video TX or FPV camera with linear regulator.
- The battery should be 4S LiPo (1318V DC)
- Voltage: 12.0 +/- 0.3VDC
- Continuous current: 500mA (Max.0.8A 5s/minute)
- Short-circuit tolerant (2 seconds/minute)

BEC 12V 3S LiPo
- Output voltage= 3S LiPo voltage -1V

Physical:
- Dimensions: 36 x 50 x 4 mm (without XT60)
- Mounting: 30.5 x 30.5mm, ?3mm
- Weight: 7.5g(without XT60), 11g(with XT60)
------------------------------------------------------------------------------
Package Including
1 * Matek XT60 PDB
1 * XT60

Write a Review

Fresh Store Builder - The Most Advanced Amazon Affiliate Software